Add fft, 2d_fft and sinwave to examples.
[Faustine.git] / interpretor / preprocessor / faust-0.9.47mr3 / compiler / Doxyfile
1 # Doxyfile 1.5.8
2
3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project
5 #
6 # All text after a hash (#) is considered a comment and will be ignored
7 # The format is:
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ")
12
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
16
17 # This tag specifies the encoding used for all characters in the config file
18 # that follow. The default is UTF-8 which is also the encoding used for all
19 # text before the first occurrence of this tag. Doxygen uses libiconv (or the
20 # iconv built into libc) for the transcoding. See
21 # http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23 DOXYFILE_ENCODING = UTF-8
24
25 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26 # by quotes) that should identify the project.
27
28 PROJECT_NAME = "FAUST compiler"
29
30 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
31 # This could be handy for archiving the generated documentation or
32 # if some version control system is used.
33
34 PROJECT_NUMBER = 0.9.9.6b8
35
36 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37 # base path where the generated documentation will be put.
38 # If a relative path is entered, it will be relative to the location
39 # where doxygen was started. If left blank the current directory will be used.
40
41 OUTPUT_DIRECTORY = ../dox
42
43 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44 # 4096 sub-directories (in 2 levels) under the output directory of each output
45 # format and will distribute the generated files over these directories.
46 # Enabling this option can be useful when feeding doxygen a huge amount of
47 # source files, where putting all generated files in the same directory would
48 # otherwise cause performance problems for the file system.
49
50 CREATE_SUBDIRS = NO
51
52 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
53 # documentation generated by doxygen is written. Doxygen will use this
54 # information to generate all constant output in the proper language.
55 # The default language is English, other supported languages are:
56 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57 # Croatian, Czech, Danish, Dutch, Farsi, Finnish, French, German, Greek,
58 # Hungarian, Italian, Japanese, Japanese-en (Japanese with English messages),
59 # Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, Polish,
60 # Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, Slovene,
61 # Spanish, Swedish, and Ukrainian.
62
63 OUTPUT_LANGUAGE = English
64
65 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66 # include brief member descriptions after the members that are listed in
67 # the file and class documentation (similar to JavaDoc).
68 # Set to NO to disable this.
69
70 BRIEF_MEMBER_DESC = YES
71
72 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73 # the brief description of a member or function before the detailed description.
74 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75 # brief descriptions will be completely suppressed.
76
77 REPEAT_BRIEF = YES
78
79 # This tag implements a quasi-intelligent brief description abbreviator
80 # that is used to form the text in various listings. Each string
81 # in this list, if found as the leading text of the brief description, will be
82 # stripped from the text and the result after processing the whole list, is
83 # used as the annotated text. Otherwise, the brief description is used as-is.
84 # If left blank, the following values are used ("$name" is automatically
85 # replaced with the name of the entity): "The $name class" "The $name widget"
86 # "The $name file" "is" "provides" "specifies" "contains"
87 # "represents" "a" "an" "the"
88
89 ABBREVIATE_BRIEF = "The $name class" \
90 "The $name widget" \
91 "The $name file" \
92 is \
93 provides \
94 specifies \
95 contains \
96 represents \
97 a \
98 an \
99 the
100
101 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
102 # Doxygen will generate a detailed section even if there is only a brief
103 # description.
104
105 ALWAYS_DETAILED_SEC = NO
106
107 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
108 # inherited members of a class in the documentation of that class as if those
109 # members were ordinary class members. Constructors, destructors and assignment
110 # operators of the base classes will not be shown.
111
112 INLINE_INHERITED_MEMB = NO
113
114 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
115 # path before files name in the file list and in the header files. If set
116 # to NO the shortest path that makes the file name unique will be used.
117
118 FULL_PATH_NAMES = NO
119
120 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
121 # can be used to strip a user-defined part of the path. Stripping is
122 # only done if one of the specified strings matches the left-hand part of
123 # the path. The tag can be used to show relative paths in the file list.
124 # If left blank the directory from which doxygen is run is used as the
125 # path to strip.
126
127 STRIP_FROM_PATH =
128
129 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
130 # the path mentioned in the documentation of a class, which tells
131 # the reader which header file to include in order to use a class.
132 # If left blank only the name of the header file containing the class
133 # definition is used. Otherwise one should specify the include paths that
134 # are normally passed to the compiler using the -I flag.
135
136 STRIP_FROM_INC_PATH =
137
138 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
139 # (but less readable) file names. This can be useful is your file systems
140 # doesn't support long names like on DOS, Mac, or CD-ROM.
141
142 SHORT_NAMES = NO
143
144 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
145 # will interpret the first line (until the first dot) of a JavaDoc-style
146 # comment as the brief description. If set to NO, the JavaDoc
147 # comments will behave just like regular Qt-style comments
148 # (thus requiring an explicit @brief command for a brief description.)
149
150 JAVADOC_AUTOBRIEF = YES
151
152 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
153 # interpret the first line (until the first dot) of a Qt-style
154 # comment as the brief description. If set to NO, the comments
155 # will behave just like regular Qt-style comments (thus requiring
156 # an explicit \brief command for a brief description.)
157
158 QT_AUTOBRIEF = NO
159
160 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
161 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
162 # comments) as a brief description. This used to be the default behaviour.
163 # The new default is to treat a multi-line C++ comment block as a detailed
164 # description. Set this tag to YES if you prefer the old behaviour instead.
165
166 MULTILINE_CPP_IS_BRIEF = NO
167
168 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
169 # member inherits the documentation from any documented member that it
170 # re-implements.
171
172 INHERIT_DOCS = YES
173
174 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
175 # a new page for each member. If set to NO, the documentation of a member will
176 # be part of the file/class/namespace that contains it.
177
178 SEPARATE_MEMBER_PAGES = NO
179
180 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
181 # Doxygen uses this value to replace tabs by spaces in code fragments.
182
183 TAB_SIZE = 4
184
185 # This tag can be used to specify a number of aliases that acts
186 # as commands in the documentation. An alias has the form "name=value".
187 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
188 # put the command \sideeffect (or @sideeffect) in the documentation, which
189 # will result in a user-defined paragraph with heading "Side Effects:".
190 # You can put \n's in the value part of an alias to insert newlines.
191
192 ALIASES =
193
194 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
195 # sources only. Doxygen will then generate output that is more tailored for C.
196 # For instance, some of the names that are used will be different. The list
197 # of all members will be omitted, etc.
198
199 OPTIMIZE_OUTPUT_FOR_C = NO
200
201 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
202 # sources only. Doxygen will then generate output that is more tailored for
203 # Java. For instance, namespaces will be presented as packages, qualified
204 # scopes will look different, etc.
205
206 OPTIMIZE_OUTPUT_JAVA = NO
207
208 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
209 # sources only. Doxygen will then generate output that is more tailored for
210 # Fortran.
211
212 OPTIMIZE_FOR_FORTRAN = NO
213
214 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
215 # sources. Doxygen will then generate output that is tailored for
216 # VHDL.
217
218 OPTIMIZE_OUTPUT_VHDL = NO
219
220 # Doxygen selects the parser to use depending on the extension of the files it parses.
221 # With this tag you can assign which parser to use for a given extension.
222 # Doxygen has a built-in mapping, but you can override or extend it using this tag.
223 # The format is ext=language, where ext is a file extension, and language is one of
224 # the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
225 # Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
226 # .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
227 # use: inc=Fortran f=C
228
229 EXTENSION_MAPPING =
230
231 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
232 # to include (a tag file for) the STL sources as input, then you should
233 # set this tag to YES in order to let doxygen match functions declarations and
234 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
235 # func(std::string) {}). This also make the inheritance and collaboration
236 # diagrams that involve STL classes more complete and accurate.
237
238 BUILTIN_STL_SUPPORT = NO
239
240 # If you use Microsoft's C++/CLI language, you should set this option to YES to
241 # enable parsing support.
242
243 CPP_CLI_SUPPORT = NO
244
245 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
246 # Doxygen will parse them like normal C++ but will assume all classes use public
247 # instead of private inheritance when no explicit protection keyword is present.
248
249 SIP_SUPPORT = NO
250
251 # For Microsoft's IDL there are propget and propput attributes to indicate getter
252 # and setter methods for a property. Setting this option to YES (the default)
253 # will make doxygen to replace the get and set methods by a property in the
254 # documentation. This will only work if the methods are indeed getting or
255 # setting a simple type. If this is not the case, or you want to show the
256 # methods anyway, you should set this option to NO.
257
258 IDL_PROPERTY_SUPPORT = YES
259
260 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
261 # tag is set to YES, then doxygen will reuse the documentation of the first
262 # member in the group (if any) for the other members of the group. By default
263 # all members of a group must be documented explicitly.
264
265 DISTRIBUTE_GROUP_DOC = NO
266
267 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
268 # the same type (for instance a group of public functions) to be put as a
269 # subgroup of that type (e.g. under the Public Functions section). Set it to
270 # NO to prevent subgrouping. Alternatively, this can be done per class using
271 # the \nosubgrouping command.
272
273 SUBGROUPING = YES
274
275 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
276 # is documented as struct, union, or enum with the name of the typedef. So
277 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
278 # with name TypeT. When disabled the typedef will appear as a member of a file,
279 # namespace, or class. And the struct will be named TypeS. This can typically
280 # be useful for C code in case the coding convention dictates that all compound
281 # types are typedef'ed and only the typedef is referenced, never the tag name.
282
283 TYPEDEF_HIDES_STRUCT = NO
284
285 # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
286 # determine which symbols to keep in memory and which to flush to disk.
287 # When the cache is full, less often used symbols will be written to disk.
288 # For small to medium size projects (<1000 input files) the default value is
289 # probably good enough. For larger projects a too small cache size can cause
290 # doxygen to be busy swapping symbols to and from disk most of the time
291 # causing a significant performance penality.
292 # If the system has enough physical memory increasing the cache will improve the
293 # performance by keeping more symbols in memory. Note that the value works on
294 # a logarithmic scale so increasing the size by one will rougly double the
295 # memory usage. The cache size is given by this formula:
296 # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
297 # corresponding to a cache size of 2^16 = 65536 symbols
298
299 SYMBOL_CACHE_SIZE = 0
300
301 #---------------------------------------------------------------------------
302 # Build related configuration options
303 #---------------------------------------------------------------------------
304
305 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
306 # documentation are documented, even if no documentation was available.
307 # Private class members and static file members will be hidden unless
308 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
309
310 EXTRACT_ALL = YES
311
312 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
313 # will be included in the documentation.
314
315 EXTRACT_PRIVATE = YES
316
317 # If the EXTRACT_STATIC tag is set to YES all static members of a file
318 # will be included in the documentation.
319
320 EXTRACT_STATIC = YES
321
322 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
323 # defined locally in source files will be included in the documentation.
324 # If set to NO only classes defined in header files are included.
325
326 EXTRACT_LOCAL_CLASSES = YES
327
328 # This flag is only useful for Objective-C code. When set to YES local
329 # methods, which are defined in the implementation section but not in
330 # the interface are included in the documentation.
331 # If set to NO (the default) only methods in the interface are included.
332
333 EXTRACT_LOCAL_METHODS = NO
334
335 # If this flag is set to YES, the members of anonymous namespaces will be
336 # extracted and appear in the documentation as a namespace called
337 # 'anonymous_namespace{file}', where file will be replaced with the base
338 # name of the file that contains the anonymous namespace. By default
339 # anonymous namespace are hidden.
340
341 EXTRACT_ANON_NSPACES = NO
342
343 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
344 # undocumented members of documented classes, files or namespaces.
345 # If set to NO (the default) these members will be included in the
346 # various overviews, but no documentation section is generated.
347 # This option has no effect if EXTRACT_ALL is enabled.
348
349 HIDE_UNDOC_MEMBERS = YES
350
351 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
352 # undocumented classes that are normally visible in the class hierarchy.
353 # If set to NO (the default) these classes will be included in the various
354 # overviews. This option has no effect if EXTRACT_ALL is enabled.
355
356 HIDE_UNDOC_CLASSES = YES
357
358 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
359 # friend (class|struct|union) declarations.
360 # If set to NO (the default) these declarations will be included in the
361 # documentation.
362
363 HIDE_FRIEND_COMPOUNDS = NO
364
365 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
366 # documentation blocks found inside the body of a function.
367 # If set to NO (the default) these blocks will be appended to the
368 # function's detailed documentation block.
369
370 HIDE_IN_BODY_DOCS = NO
371
372 # The INTERNAL_DOCS tag determines if documentation
373 # that is typed after a \internal command is included. If the tag is set
374 # to NO (the default) then the documentation will be excluded.
375 # Set it to YES to include the internal documentation.
376
377 INTERNAL_DOCS = NO
378
379 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
380 # file names in lower-case letters. If set to YES upper-case letters are also
381 # allowed. This is useful if you have classes or files whose names only differ
382 # in case and if your file system supports case sensitive file names. Windows
383 # and Mac users are advised to set this option to NO.
384
385 CASE_SENSE_NAMES = YES
386
387 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
388 # will show members with their full class and namespace scopes in the
389 # documentation. If set to YES the scope will be hidden.
390
391 HIDE_SCOPE_NAMES = NO
392
393 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
394 # will put a list of the files that are included by a file in the documentation
395 # of that file.
396
397 SHOW_INCLUDE_FILES = YES
398
399 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
400 # is inserted in the documentation for inline members.
401
402 INLINE_INFO = YES
403
404 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
405 # will sort the (detailed) documentation of file and class members
406 # alphabetically by member name. If set to NO the members will appear in
407 # declaration order.
408
409 SORT_MEMBER_DOCS = YES
410
411 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
412 # brief documentation of file, namespace and class members alphabetically
413 # by member name. If set to NO (the default) the members will appear in
414 # declaration order.
415
416 SORT_BRIEF_DOCS = NO
417
418 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
419 # hierarchy of group names into alphabetical order. If set to NO (the default)
420 # the group names will appear in their defined order.
421
422 SORT_GROUP_NAMES = NO
423
424 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
425 # sorted by fully-qualified names, including namespaces. If set to
426 # NO (the default), the class list will be sorted only by class name,
427 # not including the namespace part.
428 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
429 # Note: This option applies only to the class list, not to the
430 # alphabetical list.
431
432 SORT_BY_SCOPE_NAME = NO
433
434 # The GENERATE_TODOLIST tag can be used to enable (YES) or
435 # disable (NO) the todo list. This list is created by putting \todo
436 # commands in the documentation.
437
438 GENERATE_TODOLIST = YES
439
440 # The GENERATE_TESTLIST tag can be used to enable (YES) or
441 # disable (NO) the test list. This list is created by putting \test
442 # commands in the documentation.
443
444 GENERATE_TESTLIST = YES
445
446 # The GENERATE_BUGLIST tag can be used to enable (YES) or
447 # disable (NO) the bug list. This list is created by putting \bug
448 # commands in the documentation.
449
450 GENERATE_BUGLIST = YES
451
452 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
453 # disable (NO) the deprecated list. This list is created by putting
454 # \deprecated commands in the documentation.
455
456 GENERATE_DEPRECATEDLIST= YES
457
458 # The ENABLED_SECTIONS tag can be used to enable conditional
459 # documentation sections, marked by \if sectionname ... \endif.
460
461 ENABLED_SECTIONS =
462
463 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
464 # the initial value of a variable or define consists of for it to appear in
465 # the documentation. If the initializer consists of more lines than specified
466 # here it will be hidden. Use a value of 0 to hide initializers completely.
467 # The appearance of the initializer of individual variables and defines in the
468 # documentation can be controlled using \showinitializer or \hideinitializer
469 # command in the documentation regardless of this setting.
470
471 MAX_INITIALIZER_LINES = 30
472
473 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
474 # at the bottom of the documentation of classes and structs. If set to YES the
475 # list will mention the files that were used to generate the documentation.
476
477 SHOW_USED_FILES = YES
478
479 # If the sources in your project are distributed over multiple directories
480 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
481 # in the documentation. The default is NO.
482
483 SHOW_DIRECTORIES = NO
484
485 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
486 # This will remove the Files entry from the Quick Index and from the
487 # Folder Tree View (if specified). The default is YES.
488
489 SHOW_FILES = YES
490
491 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
492 # Namespaces page. This will remove the Namespaces entry from the Quick Index
493 # and from the Folder Tree View (if specified). The default is YES.
494
495 SHOW_NAMESPACES = YES
496
497 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
498 # doxygen should invoke to get the current version for each file (typically from
499 # the version control system). Doxygen will invoke the program by executing (via
500 # popen()) the command <command> <input-file>, where <command> is the value of
501 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
502 # provided by doxygen. Whatever the program writes to standard output
503 # is used as the file version. See the manual for examples.
504
505 FILE_VERSION_FILTER =
506
507 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
508 # doxygen. The layout file controls the global structure of the generated output files
509 # in an output format independent way. The create the layout file that represents
510 # doxygen's defaults, run doxygen with the -l option. You can optionally specify a
511 # file name after the option, if omitted DoxygenLayout.xml will be used as the name
512 # of the layout file.
513
514 LAYOUT_FILE =
515
516 #---------------------------------------------------------------------------
517 # configuration options related to warning and progress messages
518 #---------------------------------------------------------------------------
519
520 # The QUIET tag can be used to turn on/off the messages that are generated
521 # by doxygen. Possible values are YES and NO. If left blank NO is used.
522
523 QUIET = NO
524
525 # The WARNINGS tag can be used to turn on/off the warning messages that are
526 # generated by doxygen. Possible values are YES and NO. If left blank
527 # NO is used.
528
529 WARNINGS = YES
530
531 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
532 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
533 # automatically be disabled.
534
535 WARN_IF_UNDOCUMENTED = YES
536
537 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
538 # potential errors in the documentation, such as not documenting some
539 # parameters in a documented function, or documenting parameters that
540 # don't exist or using markup commands wrongly.
541
542 WARN_IF_DOC_ERROR = YES
543
544 # This WARN_NO_PARAMDOC option can be abled to get warnings for
545 # functions that are documented, but have no documentation for their parameters
546 # or return value. If set to NO (the default) doxygen will only warn about
547 # wrong or incomplete parameter documentation, but not about the absence of
548 # documentation.
549
550 WARN_NO_PARAMDOC = NO
551
552 # The WARN_FORMAT tag determines the format of the warning messages that
553 # doxygen can produce. The string should contain the $file, $line, and $text
554 # tags, which will be replaced by the file and line number from which the
555 # warning originated and the warning text. Optionally the format may contain
556 # $version, which will be replaced by the version of the file (if it could
557 # be obtained via FILE_VERSION_FILTER)
558
559 WARN_FORMAT = "$file:$line: $text"
560
561 # The WARN_LOGFILE tag can be used to specify a file to which warning
562 # and error messages should be written. If left blank the output is written
563 # to stderr.
564
565 WARN_LOGFILE =
566
567 #---------------------------------------------------------------------------
568 # configuration options related to the input files
569 #---------------------------------------------------------------------------
570
571 # The INPUT tag can be used to specify the files and/or directories that contain
572 # documented source files. You may enter file names like "myfile.cpp" or
573 # directories like "/usr/src/myproject". Separate the files or directories
574 # with spaces.
575
576 INPUT = .
577
578 # This tag can be used to specify the character encoding of the source files
579 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
580 # also the default input encoding. Doxygen uses libiconv (or the iconv built
581 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
582 # the list of possible encodings.
583
584 INPUT_ENCODING = UTF-8
585
586 # If the value of the INPUT tag contains directories, you can use the
587 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
588 # and *.h) to filter out the source-files in the directories. If left
589 # blank the following patterns are tested:
590 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
591 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
592
593 FILE_PATTERNS = *.cpp \
594 *.hh \
595 *.h
596
597 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
598 # should be searched for input files as well. Possible values are YES and NO.
599 # If left blank NO is used.
600
601 RECURSIVE = YES
602
603 # The EXCLUDE tag can be used to specify files and/or directories that should
604 # excluded from the INPUT source files. This way you can easily exclude a
605 # subdirectory from a directory tree whose root is specified with the INPUT tag.
606
607 EXCLUDE =
608
609 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
610 # directories that are symbolic links (a Unix filesystem feature) are excluded
611 # from the input.
612
613 EXCLUDE_SYMLINKS = NO
614
615 # If the value of the INPUT tag contains directories, you can use the
616 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
617 # certain files from those directories. Note that the wildcards are matched
618 # against the file with absolute path, so to exclude all test directories
619 # for example use the pattern */test/*
620
621 EXCLUDE_PATTERNS =
622
623 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
624 # (namespaces, classes, functions, etc.) that should be excluded from the
625 # output. The symbol name can be a fully qualified name, a word, or if the
626 # wildcard * is used, a substring. Examples: ANamespace, AClass,
627 # AClass::ANamespace, ANamespace::*Test
628
629 EXCLUDE_SYMBOLS =
630
631 # The EXAMPLE_PATH tag can be used to specify one or more files or
632 # directories that contain example code fragments that are included (see
633 # the \include command).
634
635 EXAMPLE_PATH =
636
637 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
638 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
639 # and *.h) to filter out the source-files in the directories. If left
640 # blank all files are included.
641
642 EXAMPLE_PATTERNS =
643
644 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
645 # searched for input files to be used with the \include or \dontinclude
646 # commands irrespective of the value of the RECURSIVE tag.
647 # Possible values are YES and NO. If left blank NO is used.
648
649 EXAMPLE_RECURSIVE = NO
650
651 # The IMAGE_PATH tag can be used to specify one or more files or
652 # directories that contain image that are included in the documentation (see
653 # the \image command).
654
655 IMAGE_PATH =
656
657 # The INPUT_FILTER tag can be used to specify a program that doxygen should
658 # invoke to filter for each input file. Doxygen will invoke the filter program
659 # by executing (via popen()) the command <filter> <input-file>, where <filter>
660 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
661 # input file. Doxygen will then use the output that the filter program writes
662 # to standard output. If FILTER_PATTERNS is specified, this tag will be
663 # ignored.
664
665 INPUT_FILTER =
666
667 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
668 # basis. Doxygen will compare the file name with each pattern and apply the
669 # filter if there is a match. The filters are a list of the form:
670 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
671 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
672 # is applied to all files.
673
674 FILTER_PATTERNS =
675
676 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
677 # INPUT_FILTER) will be used to filter the input files when producing source
678 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
679
680 FILTER_SOURCE_FILES = NO
681
682 #---------------------------------------------------------------------------
683 # configuration options related to source browsing
684 #---------------------------------------------------------------------------
685
686 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
687 # be generated. Documented entities will be cross-referenced with these sources.
688 # Note: To get rid of all source code in the generated output, make sure also
689 # VERBATIM_HEADERS is set to NO.
690
691 SOURCE_BROWSER = YES
692
693 # Setting the INLINE_SOURCES tag to YES will include the body
694 # of functions and classes directly in the documentation.
695
696 INLINE_SOURCES = YES
697
698 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
699 # doxygen to hide any special comment blocks from generated source code
700 # fragments. Normal C and C++ comments will always remain visible.
701
702 STRIP_CODE_COMMENTS = YES
703
704 # If the REFERENCED_BY_RELATION tag is set to YES
705 # then for each documented function all documented
706 # functions referencing it will be listed.
707
708 REFERENCED_BY_RELATION = YES
709
710 # If the REFERENCES_RELATION tag is set to YES
711 # then for each documented function all documented entities
712 # called/used by that function will be listed.
713
714 REFERENCES_RELATION = YES
715
716 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
717 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
718 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
719 # link to the source code. Otherwise they will link to the documentation.
720
721 REFERENCES_LINK_SOURCE = YES
722
723 # If the USE_HTAGS tag is set to YES then the references to source code
724 # will point to the HTML generated by the htags(1) tool instead of doxygen
725 # built-in source browser. The htags tool is part of GNU's global source
726 # tagging system (see http://www.gnu.org/software/global/global.html). You
727 # will need version 4.8.6 or higher.
728
729 USE_HTAGS = NO
730
731 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
732 # will generate a verbatim copy of the header file for each class for
733 # which an include is specified. Set to NO to disable this.
734
735 VERBATIM_HEADERS = YES
736
737 #---------------------------------------------------------------------------
738 # configuration options related to the alphabetical class index
739 #---------------------------------------------------------------------------
740
741 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
742 # of all compounds will be generated. Enable this if the project
743 # contains a lot of classes, structs, unions or interfaces.
744
745 ALPHABETICAL_INDEX = YES
746
747 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
748 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
749 # in which this list will be split (can be a number in the range [1..20])
750
751 COLS_IN_ALPHA_INDEX = 5
752
753 # In case all classes in a project start with a common prefix, all
754 # classes will be put under the same header in the alphabetical index.
755 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
756 # should be ignored while generating the index headers.
757
758 IGNORE_PREFIX =
759
760 #---------------------------------------------------------------------------
761 # configuration options related to the HTML output
762 #---------------------------------------------------------------------------
763
764 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
765 # generate HTML output.
766
767 GENERATE_HTML = YES
768
769 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
770 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
771 # put in front of it. If left blank `html' will be used as the default path.
772
773 HTML_OUTPUT = html
774
775 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
776 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
777 # doxygen will generate files with .html extension.
778
779 HTML_FILE_EXTENSION = .html
780
781 # The HTML_HEADER tag can be used to specify a personal HTML header for
782 # each generated HTML page. If it is left blank doxygen will generate a
783 # standard header.
784
785 HTML_HEADER =
786
787 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
788 # each generated HTML page. If it is left blank doxygen will generate a
789 # standard footer.
790
791 HTML_FOOTER =
792
793 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
794 # style sheet that is used by each HTML page. It can be used to
795 # fine-tune the look of the HTML output. If the tag is left blank doxygen
796 # will generate a default style sheet. Note that doxygen will try to copy
797 # the style sheet file to the HTML output directory, so don't put your own
798 # stylesheet in the HTML output directory as well, or it will be erased!
799
800 HTML_STYLESHEET =
801
802 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
803 # files or namespaces will be aligned in HTML using tables. If set to
804 # NO a bullet list will be used.
805
806 HTML_ALIGN_MEMBERS = YES
807
808 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
809 # documentation will contain sections that can be hidden and shown after the
810 # page has loaded. For this to work a browser that supports
811 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
812 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
813
814 HTML_DYNAMIC_SECTIONS = NO
815
816 # If the GENERATE_DOCSET tag is set to YES, additional index files
817 # will be generated that can be used as input for Apple's Xcode 3
818 # integrated development environment, introduced with OSX 10.5 (Leopard).
819 # To create a documentation set, doxygen will generate a Makefile in the
820 # HTML output directory. Running make will produce the docset in that
821 # directory and running "make install" will install the docset in
822 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
823 # it at startup.
824 # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
825
826 GENERATE_DOCSET = NO
827
828 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
829 # feed. A documentation feed provides an umbrella under which multiple
830 # documentation sets from a single provider (such as a company or product suite)
831 # can be grouped.
832
833 DOCSET_FEEDNAME = "Doxygen generated docs"
834
835 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
836 # should uniquely identify the documentation set bundle. This should be a
837 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
838 # will append .docset to the name.
839
840 DOCSET_BUNDLE_ID = org.doxygen.Project
841
842 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
843 # will be generated that can be used as input for tools like the
844 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
845 # of the generated HTML documentation.
846
847 GENERATE_HTMLHELP = NO
848
849 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
850 # be used to specify the file name of the resulting .chm file. You
851 # can add a path in front of the file if the result should not be
852 # written to the html output directory.
853
854 CHM_FILE =
855
856 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
857 # be used to specify the location (absolute path including file name) of
858 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
859 # the HTML help compiler on the generated index.hhp.
860
861 HHC_LOCATION =
862
863 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
864 # controls if a separate .chi index file is generated (YES) or that
865 # it should be included in the master .chm file (NO).
866
867 GENERATE_CHI = NO
868
869 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
870 # is used to encode HtmlHelp index (hhk), content (hhc) and project file
871 # content.
872
873 CHM_INDEX_ENCODING =
874
875 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
876 # controls whether a binary table of contents is generated (YES) or a
877 # normal table of contents (NO) in the .chm file.
878
879 BINARY_TOC = NO
880
881 # The TOC_EXPAND flag can be set to YES to add extra items for group members
882 # to the contents of the HTML help documentation and to the tree view.
883
884 TOC_EXPAND = NO
885
886 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
887 # are set, an additional index file will be generated that can be used as input for
888 # Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
889 # HTML documentation.
890
891 GENERATE_QHP = NO
892
893 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
894 # be used to specify the file name of the resulting .qch file.
895 # The path specified is relative to the HTML output folder.
896
897 QCH_FILE =
898
899 # The QHP_NAMESPACE tag specifies the namespace to use when generating
900 # Qt Help Project output. For more information please see
901 # http://doc.trolltech.com/qthelpproject.html#namespace
902
903 QHP_NAMESPACE =
904
905 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
906 # Qt Help Project output. For more information please see
907 # http://doc.trolltech.com/qthelpproject.html#virtual-folders
908
909 QHP_VIRTUAL_FOLDER = doc
910
911 # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
912 # For more information please see
913 # http://doc.trolltech.com/qthelpproject.html#custom-filters
914
915 QHP_CUST_FILTER_NAME =
916
917 # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
918 # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
919
920 QHP_CUST_FILTER_ATTRS =
921
922 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
923 # filter section matches.
924 # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
925
926 QHP_SECT_FILTER_ATTRS =
927
928 # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
929 # be used to specify the location of Qt's qhelpgenerator.
930 # If non-empty doxygen will try to run qhelpgenerator on the generated
931 # .qhp file.
932
933 QHG_LOCATION =
934
935 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
936 # top of each HTML page. The value NO (the default) enables the index and
937 # the value YES disables it.
938
939 DISABLE_INDEX = NO
940
941 # This tag can be used to set the number of enum values (range [1..20])
942 # that doxygen will group on one line in the generated HTML documentation.
943
944 ENUM_VALUES_PER_LINE = 4
945
946 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
947 # structure should be generated to display hierarchical information.
948 # If the tag value is set to FRAME, a side panel will be generated
949 # containing a tree-like index structure (just like the one that
950 # is generated for HTML Help). For this to work a browser that supports
951 # JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+,
952 # Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are
953 # probably better off using the HTML help feature. Other possible values
954 # for this tag are: HIERARCHIES, which will generate the Groups, Directories,
955 # and Class Hierarchy pages using a tree view instead of an ordered list;
956 # ALL, which combines the behavior of FRAME and HIERARCHIES; and NONE, which
957 # disables this behavior completely. For backwards compatibility with previous
958 # releases of Doxygen, the values YES and NO are equivalent to FRAME and NONE
959 # respectively.
960
961 GENERATE_TREEVIEW = NO
962
963 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
964 # used to set the initial width (in pixels) of the frame in which the tree
965 # is shown.
966
967 TREEVIEW_WIDTH = 250
968
969 # Use this tag to change the font size of Latex formulas included
970 # as images in the HTML documentation. The default is 10. Note that
971 # when you change the font size after a successful doxygen run you need
972 # to manually remove any form_*.png images from the HTML output directory
973 # to force them to be regenerated.
974
975 FORMULA_FONTSIZE = 10
976
977 #---------------------------------------------------------------------------
978 # configuration options related to the LaTeX output
979 #---------------------------------------------------------------------------
980
981 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
982 # generate Latex output.
983
984 GENERATE_LATEX = YES
985
986 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
987 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
988 # put in front of it. If left blank `latex' will be used as the default path.
989
990 LATEX_OUTPUT = latex
991
992 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
993 # invoked. If left blank `latex' will be used as the default command name.
994
995 LATEX_CMD_NAME = latex
996
997 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
998 # generate index for LaTeX. If left blank `makeindex' will be used as the
999 # default command name.
1000
1001 MAKEINDEX_CMD_NAME = makeindex
1002
1003 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1004 # LaTeX documents. This may be useful for small projects and may help to
1005 # save some trees in general.
1006
1007 COMPACT_LATEX = NO
1008
1009 # The PAPER_TYPE tag can be used to set the paper type that is used
1010 # by the printer. Possible values are: a4, a4wide, letter, legal and
1011 # executive. If left blank a4wide will be used.
1012
1013 PAPER_TYPE = a4wide
1014
1015 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1016 # packages that should be included in the LaTeX output.
1017
1018 EXTRA_PACKAGES =
1019
1020 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1021 # the generated latex document. The header should contain everything until
1022 # the first chapter. If it is left blank doxygen will generate a
1023 # standard header. Notice: only use this tag if you know what you are doing!
1024
1025 LATEX_HEADER =
1026
1027 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1028 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
1029 # contain links (just like the HTML output) instead of page references
1030 # This makes the output suitable for online browsing using a pdf viewer.
1031
1032 PDF_HYPERLINKS = YES
1033
1034 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1035 # plain latex in the generated Makefile. Set this option to YES to get a
1036 # higher quality PDF documentation.
1037
1038 USE_PDFLATEX = YES
1039
1040 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1041 # command to the generated LaTeX files. This will instruct LaTeX to keep
1042 # running if errors occur, instead of asking the user for help.
1043 # This option is also used when generating formulas in HTML.
1044
1045 LATEX_BATCHMODE = NO
1046
1047 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
1048 # include the index chapters (such as File Index, Compound Index, etc.)
1049 # in the output.
1050
1051 LATEX_HIDE_INDICES = NO
1052
1053 #---------------------------------------------------------------------------
1054 # configuration options related to the RTF output
1055 #---------------------------------------------------------------------------
1056
1057 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1058 # The RTF output is optimized for Word 97 and may not look very pretty with
1059 # other RTF readers or editors.
1060
1061 GENERATE_RTF = NO
1062
1063 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1064 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1065 # put in front of it. If left blank `rtf' will be used as the default path.
1066
1067 RTF_OUTPUT = rtf
1068
1069 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1070 # RTF documents. This may be useful for small projects and may help to
1071 # save some trees in general.
1072
1073 COMPACT_RTF = NO
1074
1075 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1076 # will contain hyperlink fields. The RTF file will
1077 # contain links (just like the HTML output) instead of page references.
1078 # This makes the output suitable for online browsing using WORD or other
1079 # programs which support those fields.
1080 # Note: wordpad (write) and others do not support links.
1081
1082 RTF_HYPERLINKS = NO
1083
1084 # Load stylesheet definitions from file. Syntax is similar to doxygen's
1085 # config file, i.e. a series of assignments. You only have to provide
1086 # replacements, missing definitions are set to their default value.
1087
1088 RTF_STYLESHEET_FILE =
1089
1090 # Set optional variables used in the generation of an rtf document.
1091 # Syntax is similar to doxygen's config file.
1092
1093 RTF_EXTENSIONS_FILE =
1094
1095 #---------------------------------------------------------------------------
1096 # configuration options related to the man page output
1097 #---------------------------------------------------------------------------
1098
1099 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1100 # generate man pages
1101
1102 GENERATE_MAN = NO
1103
1104 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
1105 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1106 # put in front of it. If left blank `man' will be used as the default path.
1107
1108 MAN_OUTPUT = man
1109
1110 # The MAN_EXTENSION tag determines the extension that is added to
1111 # the generated man pages (default is the subroutine's section .3)
1112
1113 MAN_EXTENSION = .3
1114
1115 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1116 # then it will generate one additional man file for each entity
1117 # documented in the real man page(s). These additional files
1118 # only source the real man page, but without them the man command
1119 # would be unable to find the correct page. The default is NO.
1120
1121 MAN_LINKS = NO
1122
1123 #---------------------------------------------------------------------------
1124 # configuration options related to the XML output
1125 #---------------------------------------------------------------------------
1126
1127 # If the GENERATE_XML tag is set to YES Doxygen will
1128 # generate an XML file that captures the structure of
1129 # the code including all documentation.
1130
1131 GENERATE_XML = NO
1132
1133 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
1134 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1135 # put in front of it. If left blank `xml' will be used as the default path.
1136
1137 XML_OUTPUT = xml
1138
1139 # The XML_SCHEMA tag can be used to specify an XML schema,
1140 # which can be used by a validating XML parser to check the
1141 # syntax of the XML files.
1142
1143 XML_SCHEMA =
1144
1145 # The XML_DTD tag can be used to specify an XML DTD,
1146 # which can be used by a validating XML parser to check the
1147 # syntax of the XML files.
1148
1149 XML_DTD =
1150
1151 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1152 # dump the program listings (including syntax highlighting
1153 # and cross-referencing information) to the XML output. Note that
1154 # enabling this will significantly increase the size of the XML output.
1155
1156 XML_PROGRAMLISTING = YES
1157
1158 #---------------------------------------------------------------------------
1159 # configuration options for the AutoGen Definitions output
1160 #---------------------------------------------------------------------------
1161
1162 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1163 # generate an AutoGen Definitions (see autogen.sf.net) file
1164 # that captures the structure of the code including all
1165 # documentation. Note that this feature is still experimental
1166 # and incomplete at the moment.
1167
1168 GENERATE_AUTOGEN_DEF = NO
1169
1170 #---------------------------------------------------------------------------
1171 # configuration options related to the Perl module output
1172 #---------------------------------------------------------------------------
1173
1174 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
1175 # generate a Perl module file that captures the structure of
1176 # the code including all documentation. Note that this
1177 # feature is still experimental and incomplete at the
1178 # moment.
1179
1180 GENERATE_PERLMOD = NO
1181
1182 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1183 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
1184 # to generate PDF and DVI output from the Perl module output.
1185
1186 PERLMOD_LATEX = NO
1187
1188 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1189 # nicely formatted so it can be parsed by a human reader. This is useful
1190 # if you want to understand what is going on. On the other hand, if this
1191 # tag is set to NO the size of the Perl module output will be much smaller
1192 # and Perl will parse it just the same.
1193
1194 PERLMOD_PRETTY = YES
1195
1196 # The names of the make variables in the generated doxyrules.make file
1197 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1198 # This is useful so different doxyrules.make files included by the same
1199 # Makefile don't overwrite each other's variables.
1200
1201 PERLMOD_MAKEVAR_PREFIX =
1202
1203 #---------------------------------------------------------------------------
1204 # Configuration options related to the preprocessor
1205 #---------------------------------------------------------------------------
1206
1207 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1208 # evaluate all C-preprocessor directives found in the sources and include
1209 # files.
1210
1211 ENABLE_PREPROCESSING = YES
1212
1213 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1214 # names in the source code. If set to NO (the default) only conditional
1215 # compilation will be performed. Macro expansion can be done in a controlled
1216 # way by setting EXPAND_ONLY_PREDEF to YES.
1217
1218 MACRO_EXPANSION = NO
1219
1220 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1221 # then the macro expansion is limited to the macros specified with the
1222 # PREDEFINED and EXPAND_AS_DEFINED tags.
1223
1224 EXPAND_ONLY_PREDEF = NO
1225
1226 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1227 # in the INCLUDE_PATH (see below) will be search if a #include is found.
1228
1229 SEARCH_INCLUDES = YES
1230
1231 # The INCLUDE_PATH tag can be used to specify one or more directories that
1232 # contain include files that are not input files but should be processed by
1233 # the preprocessor.
1234
1235 INCLUDE_PATH =
1236
1237 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1238 # patterns (like *.h and *.hpp) to filter out the header-files in the
1239 # directories. If left blank, the patterns specified with FILE_PATTERNS will
1240 # be used.
1241
1242 INCLUDE_FILE_PATTERNS =
1243
1244 # The PREDEFINED tag can be used to specify one or more macro names that
1245 # are defined before the preprocessor is started (similar to the -D option of
1246 # gcc). The argument of the tag is a list of macros of the form: name
1247 # or name=definition (no spaces). If the definition and the = are
1248 # omitted =1 is assumed. To prevent a macro definition from being
1249 # undefined via #undef or recursively expanded use the := operator
1250 # instead of the = operator.
1251
1252 PREDEFINED =
1253
1254 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1255 # this tag can be used to specify a list of macro names that should be expanded.
1256 # The macro definition that is found in the sources will be used.
1257 # Use the PREDEFINED tag if you want to use a different macro definition.
1258
1259 EXPAND_AS_DEFINED =
1260
1261 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1262 # doxygen's preprocessor will remove all function-like macros that are alone
1263 # on a line, have an all uppercase name, and do not end with a semicolon. Such
1264 # function macros are typically used for boiler-plate code, and will confuse
1265 # the parser if not removed.
1266
1267 SKIP_FUNCTION_MACROS = YES
1268
1269 #---------------------------------------------------------------------------
1270 # Configuration::additions related to external references
1271 #---------------------------------------------------------------------------
1272
1273 # The TAGFILES option can be used to specify one or more tagfiles.
1274 # Optionally an initial location of the external documentation
1275 # can be added for each tagfile. The format of a tag file without
1276 # this location is as follows:
1277 # TAGFILES = file1 file2 ...
1278 # Adding location for the tag files is done as follows:
1279 # TAGFILES = file1=loc1 "file2 = loc2" ...
1280 # where "loc1" and "loc2" can be relative or absolute paths or
1281 # URLs. If a location is present for each tag, the installdox tool
1282 # does not have to be run to correct the links.
1283 # Note that each tag file must have a unique name
1284 # (where the name does NOT include the path)
1285 # If a tag file is not located in the directory in which doxygen
1286 # is run, you must also specify the path to the tagfile here.
1287
1288 TAGFILES =
1289
1290 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1291 # a tag file that is based on the input files it reads.
1292
1293 GENERATE_TAGFILE =
1294
1295 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1296 # in the class index. If set to NO only the inherited external classes
1297 # will be listed.
1298
1299 ALLEXTERNALS = NO
1300
1301 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1302 # in the modules index. If set to NO, only the current project's groups will
1303 # be listed.
1304
1305 EXTERNAL_GROUPS = YES
1306
1307 # The PERL_PATH should be the absolute path and name of the perl script
1308 # interpreter (i.e. the result of `which perl').
1309
1310 PERL_PATH = /usr/bin/perl
1311
1312 #---------------------------------------------------------------------------
1313 # Configuration options related to the dot tool
1314 #---------------------------------------------------------------------------
1315
1316 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1317 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1318 # or super classes. Setting the tag to NO turns the diagrams off. Note that
1319 # this option is superseded by the HAVE_DOT option below. This is only a
1320 # fallback. It is recommended to install and use dot, since it yields more
1321 # powerful graphs.
1322
1323 CLASS_DIAGRAMS = NO
1324
1325 # You can define message sequence charts within doxygen comments using the \msc
1326 # command. Doxygen will then run the mscgen tool (see
1327 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1328 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
1329 # the mscgen tool resides. If left empty the tool is assumed to be found in the
1330 # default search path.
1331
1332 MSCGEN_PATH =
1333
1334 # If set to YES, the inheritance and collaboration graphs will hide
1335 # inheritance and usage relations if the target is undocumented
1336 # or is not a class.
1337
1338 HIDE_UNDOC_RELATIONS = YES
1339
1340 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1341 # available from the path. This tool is part of Graphviz, a graph visualization
1342 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1343 # have no effect if this option is set to NO (the default)
1344
1345 HAVE_DOT = YES
1346
1347 # By default doxygen will write a font called FreeSans.ttf to the output
1348 # directory and reference it in all dot files that doxygen generates. This
1349 # font does not include all possible unicode characters however, so when you need
1350 # these (or just want a differently looking font) you can specify the font name
1351 # using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1352 # which can be done by putting it in a standard location or by setting the
1353 # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1354 # containing the font.
1355
1356 DOT_FONTNAME = FreeSans
1357
1358 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1359 # The default size is 10pt.
1360
1361 DOT_FONTSIZE = 10
1362
1363 # By default doxygen will tell dot to use the output directory to look for the
1364 # FreeSans.ttf font (which doxygen will put there itself). If you specify a
1365 # different font using DOT_FONTNAME you can set the path where dot
1366 # can find it using this tag.
1367
1368 DOT_FONTPATH =
1369
1370 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1371 # will generate a graph for each documented class showing the direct and
1372 # indirect inheritance relations. Setting this tag to YES will force the
1373 # the CLASS_DIAGRAMS tag to NO.
1374
1375 CLASS_GRAPH = YES
1376
1377 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1378 # will generate a graph for each documented class showing the direct and
1379 # indirect implementation dependencies (inheritance, containment, and
1380 # class references variables) of the class with other documented classes.
1381
1382 COLLABORATION_GRAPH = YES
1383
1384 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1385 # will generate a graph for groups, showing the direct groups dependencies
1386
1387 GROUP_GRAPHS = YES
1388
1389 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1390 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1391 # Language.
1392
1393 UML_LOOK = NO
1394
1395 # If set to YES, the inheritance and collaboration graphs will show the
1396 # relations between templates and their instances.
1397
1398 TEMPLATE_RELATIONS = YES
1399
1400 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1401 # tags are set to YES then doxygen will generate a graph for each documented
1402 # file showing the direct and indirect include dependencies of the file with
1403 # other documented files.
1404
1405 INCLUDE_GRAPH = YES
1406
1407 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1408 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1409 # documented header file showing the documented files that directly or
1410 # indirectly include this file.
1411
1412 INCLUDED_BY_GRAPH = YES
1413
1414 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
1415 # doxygen will generate a call dependency graph for every global function
1416 # or class method. Note that enabling this option will significantly increase
1417 # the time of a run. So in most cases it will be better to enable call graphs
1418 # for selected functions only using the \callgraph command.
1419
1420 CALL_GRAPH = YES
1421
1422 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1423 # doxygen will generate a caller dependency graph for every global function
1424 # or class method. Note that enabling this option will significantly increase
1425 # the time of a run. So in most cases it will be better to enable caller
1426 # graphs for selected functions only using the \callergraph command.
1427
1428 CALLER_GRAPH = YES
1429
1430 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1431 # will graphical hierarchy of all classes instead of a textual one.
1432
1433 GRAPHICAL_HIERARCHY = YES
1434
1435 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1436 # then doxygen will show the dependencies a directory has on other directories
1437 # in a graphical way. The dependency relations are determined by the #include
1438 # relations between the files in the directories.
1439
1440 DIRECTORY_GRAPH = YES
1441
1442 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1443 # generated by dot. Possible values are png, jpg, or gif
1444 # If left blank png will be used.
1445
1446 DOT_IMAGE_FORMAT = png
1447
1448 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1449 # found. If left blank, it is assumed the dot tool can be found in the path.
1450
1451 DOT_PATH =
1452
1453 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1454 # contain dot files that are included in the documentation (see the
1455 # \dotfile command).
1456
1457 DOTFILE_DIRS =
1458
1459 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1460 # nodes that will be shown in the graph. If the number of nodes in a graph
1461 # becomes larger than this value, doxygen will truncate the graph, which is
1462 # visualized by representing a node as a red box. Note that doxygen if the
1463 # number of direct children of the root node in a graph is already larger than
1464 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1465 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1466
1467 DOT_GRAPH_MAX_NODES = 50
1468
1469 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1470 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1471 # from the root by following a path via at most 3 edges will be shown. Nodes
1472 # that lay further from the root node will be omitted. Note that setting this
1473 # option to 1 or 2 may greatly reduce the computation time needed for large
1474 # code bases. Also note that the size of a graph can be further restricted by
1475 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1476
1477 MAX_DOT_GRAPH_DEPTH = 0
1478
1479 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1480 # background. This is disabled by default, because dot on Windows does not
1481 # seem to support this out of the box. Warning: Depending on the platform used,
1482 # enabling this option may lead to badly anti-aliased labels on the edges of
1483 # a graph (i.e. they become hard to read).
1484
1485 DOT_TRANSPARENT = NO
1486
1487 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1488 # files in one run (i.e. multiple -o and -T options on the command line). This
1489 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1490 # support this, this feature is disabled by default.
1491
1492 DOT_MULTI_TARGETS = NO
1493
1494 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1495 # generate a legend page explaining the meaning of the various boxes and
1496 # arrows in the dot generated graphs.
1497
1498 GENERATE_LEGEND = YES
1499
1500 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1501 # remove the intermediate dot files that are used to generate
1502 # the various graphs.
1503
1504 DOT_CLEANUP = YES
1505
1506 #---------------------------------------------------------------------------
1507 # Options related to the search engine
1508 #---------------------------------------------------------------------------
1509
1510 # The SEARCHENGINE tag specifies whether or not a search engine should be
1511 # used. If set to NO the values of all tags below this one will be ignored.
1512
1513 SEARCHENGINE = NO